Publicações
Artigos
Ano |
Título |
Autor(es) |
Revista |
| 09/2024 |
Rotary barrel tumbling as a method of surface preparation for pin-on-disc wear testing samples |
L. M. Xavier C. Boher C. Scandian |
Surface Topography: Metrology and Properties Volume 12 |
| 09/2023 |
Development of a heating system and the effect of temperature in the twin-disc test |
H. Ewald R. C. Rocha S. T. Fonseca A. B. Rezende C. Scandian P. R. Mei |
Journal of the Brazilian Society of Mechanical Sciences and Engineering Volume 45 |
| 07/2023 |
Microabrasive wear behavior of different stellites obtained by laser cladding and casting processes |
A.C. Bozzi F.D. Ramos D.B.O. Vargas |
Wear Volume 524 - 525 |
| 06/2023 |
F.P. Benincá M.C. Romero R.M. Camporez C.A.Rosa Neto N.F. Strey C. Scandian |
Wear Volume 523 |
|
| 06/2023 |
Influence of wheel tread wear on Rolling Contact Fatigue and on the dynamics of railway vehicles |
J.V. R. Silva e Silva F.A. Antoniolli C.S. Endlich A.C. Pires C. Scandian G.F.M. Dos Santos |
Wear Volume 523 |
| 06/2023 | On the tribological behavior of cobalt-based nanocomposite coatings containing ZnO@Graphene oxide core-shell nanoparticles |
M.C. Romero V. Mello C. Boher A.P. Tschiptschin C. Scandian |
Wear Volume 522 |
| 09/2022 | J.V. R. Silva e Silva
L.F.V Corrêa R.M. Camporez C. Scandian G.F.M. Dos Santos |
WIT Transactions on the Built Environment Volume 213 |
|
| 06/2022 | Superlubricity and running-in wear maps of water-lubricated dissimilar ceramics |
N.F. Strey R. Ramos C. Scandian |
Wear Volume 498 - 499 |
| 08/2021 | Comparison of rolling contact fatigue damage between railway wheels and twin-disc test specimens | N.F. Strey
A.B. Rezende R. da Silva Miranda S. Tamara da Fonseca P.R. Mei C. Scandian
|
Tribology Internacional Volume 160 |
| 07/2021 | Influence of low temperature plasma carbonitriding on cavitation erosion resistance of the Stellite 250 alloy – A preliminary evaluation |
D.B. Oliveira A.C. Bozzi |
Wear Volume 476 |
| 07/2021 | Abrasive polishing load effect on surface roughness and material removal rate of Al2O3, ZTA and SiC |
N.F. Strey C. Scandian |
Wear Volume 477 |
| 07/2021 |
Liquid media effect on the abrasion response of WC/Co hardmetal with different cobalt percent |
R.V. Magnol
T. Gatti M.C. Romero A. Sinatora C. Scandian |
Wear Volume 477 |
| 07/2021 |
P.J. Esteves V. Seriacopi M.C.S de Mâcedo R.M. Souza C. Scandian |
Wear Volume 476 |
|
| 01/2021 | Understanding the Influence of the Magnetic Field, Particle Size, and Concentration on the Tribological Performance of Superparananolubricants |
V.S. Mello A. E. D. S. Guedes F. Bohn S.M. Alves |
TribologyTransactions Volume 64 Issue 3
|
| 10/2020 | Enhancing Cuo nanolubricant performance using dispersing agents |
V.S. Mello E.A. Faria S.M. Alves C. Scandian |
Tribology Internacional Volume 150
|
| 05/2020 | Comparison between the action of nano-oxides and conventional EP additives in boundary lubrication |
V.S. Mello M. F. Trajano A. E. D. S. Guedes S. M. Alves |
Lubricants Volume 8 Issue 5 |
| 12/2019 | Effect of bleaching agents and toothpastes on the enamel: An in situ study |
M.F Silva P.S. Da Cruz A.C. Bozzi L.G.D. Daroz C.B. Dos Santos-Daroz |
American Journal of Dentistry Volume 32 Issue 6 Pages 288 - 292 |
| 08/2019 | Study of sliding wear of the wheel flange - Rail gauge corner contact conditions: Comparative between cast and forged steel wheel materials |
L.P.F. Almeida L. E. Falqueto H. Goldenstein A.C. Bozzi C. Scandian
|
Wear Volume 432 - 433 |
| 04/2019 | Low temperature plasma nitriding of a Co30Cr19Fe alloy for improving cavitation erosion resistance |
M.C. Romero A.P. Tischiptschin C. Scandian |
Wear Volumes 426 - 427, Part A Pages 581 - 588 |
| 04/2019 | Tribological characterization of jaspilite by linear scratch test |
R.V. Magnol M.Q. Macedo M.C.S de Mâcedo C. Scandian |
Wear Volumes 426 - 427, Part A Pages 142 - 150 |
| 04/2019 | Effect of ball rotation speed on wear coefficient and particle behavior in micro-abrasive wear tests |
P.J. Esteves R.M. Souza M.C.S de Mâcedo C. Scandian |
Wear Volumes 426 - 427, Part A Pages 137 - 141 |
| 04/2019 | On the reciprocating sliding wear of polypropylene against polyamide 6 in dry and aqueous environments |
R.M. Camporez N.F. Strey V.M. Machado C. Scandian |
Wear Volumes 426 - 427, Part B Pages 1018 - 1025 |
| 04/2019 | Cavitation erosion resistance of a non-standard cast cobalt alloy: Influence of solubilizing and cold working treatments |
M.C. Romero A.P. Tischiptschin C. Scandian |
Wear Volumes 426 - 427, Part A Pages 518 - 526 |
| 01/2019 | A study on the intergranular corrosion and pitting resistance of Inconel 625 coating by PTA-P |
R.A. Lorenzoni R.P. Gasparini A.C.D. Santos T.S. Luz M.C.S. de Macêdo |
Corrosion Engineering, Science and Technology Volume 54 Issue 1 Pages 62 - 74 |
| 12/2017 | Effect of post-weld heat treatment on thermal diffusivity in UNS S32304 duplex stainless steel welds |
E.G. Betini C.S. Mucsi T.S. Luz M.T.D. Orlando M.N. Avettand-Fènoël J.L. Rossi |
Archives of Materials Science and Engineering Volume 88 Issues 2 Pages 49 - 58 |
| 12/2017 | Characterization of fracture behavior of a Ti alloyed supermartensitic 12%Cr stainless steel using Charpy instrumented impact tests |
S.S.M. Tavares M.B. Silva M.C.S. de Macêdo T.R. Srohaecker V.M. Costa |
Engineering Failure Analysis Volume 82 Pages 695 - 702 |
| 12/2017 | Formation of a nanocrystalline recrystallized layer during microabrasive wear of a cobalt-chromium based alloy (Co-30Cr-19Fe) |
F.P. Marques C. Scandian A.C. Bozzi N.K. Fukumasu A.P. Tschiptschin |
Tribology Internacional Volume 116 Pages 105 - 112 |
| 11/2017 | Microabrasion of three experimental cobalt-chromium alloys: Wear rates and wear mechanisms |
F.P. Marques C. Scandian A.C. Bozzi A.P. Tschiptschin |
Wear Volume 390 - 391 Pages 176 - 183 |
| 10/2017 | Nondestructive Microstructural Characterization of Superduplex Stainless Steel by Double Loop Electrochemical Polarization Reactivation Portable Test |
T.R.Alvarez J.M. Pardal B.B.de Almeida P. Louzada S.S.M. Tavares E.A. Ponzio M.C.S. de Macêdo |
Materials Research Volume Issues Pages |
| 04/2017 | Tribological transitions during sliding of zirconia against alumina and ZTA in water |
N.F. Strey C. Scandian |
Wear Volume 376 - 377, Part A Pages 343 - 351 |
| 04/2017 | Abrasive size and load effects on the wear of a 19.9% chromium and 2.9% carbon cast iron |
K.D. Tozetti E. Albertin C. Scandian |
Wear Volume 376 - 377, Part A Pages 46 - 53 |
| 04/2017 | Sliding wear of cobalt-based alloys used in rolling seamless tubes |
L.E. Falqueto D.J. Butkus. J.D.B. de Mello. A.C.Bozzi C.Scandian |
Wear Volume 376 - 377, Part B Pages 1739 - 1746 |
| 04/2017 | Influence of Heat Treatments on the Impact Toughness of a Ti-stabilized 12%Cr Supermartensitic Stainless Steel |
S.S.M. Tavares H.F. Abreu M.C.S. de Macêdo T.R. Srohaecker M.B. Silva |
Materials Research Volume 20 Issues 2 Pages 469 - 473 |
| 12/2016 | Failure of alloy steel socket-head cap screws used in offshore oil production |
S.S.M. Tavares J.M. Pardal J.A. de Souza O.C. Pereira T.S. Luz |
Engineering Failure Analysis Volume 70 Pages 16 - 21 |
| 09/2016 | The influence of initial roughness and circular axial run-out on friction and wear behavior of Si3N4–Al2O3 sliding in water |
R. Balarini N.F. Strey A.Sinatora C.Scandian |
Tribology Internacional Volume 101 Pages 226 - 233 |
| 04/2016 | Influence of tempering treatment on microstructure and pitting corrosion resistance of a new super ferritic–martensitic–austenitic stainless steels with 17%Cr |
J.M. Pardal S.S.M. Tavares I.N. Bastos M.R. da Silva M.C.S.de Macêdo |
Corrosion Engineering, Science and Technology Volume 51 Issues 5 Pages 337 - 341 |
| 12/2015 | Failure Analysis of Guides Made of High-Strength AISI D2 Tool Steel |
C. Scandian T.S. Luz J.M. Pardal S.S.M. Tavares |
Journal of Failure Analysis and Prevention Volume 15 Issues 6 Pages 789 - 793 |
| 08/2015 | Influence of Deleterious Phases Precipitation in the Corrosion Resistance Measured by Double Loop Electrochemical Polarization Reactivation Test in Superduplex Stainless Steel |
J.M. Pardal S.S.M. Tavares G.C. de Souza M.P.C. Fonseca E.A. Ponzio M.C.S. de Macêdo |
Materials Research Volume 49 Issues 4 Pages 740 - 747 |
| 07/2015 | Influência da Deformação Plástica a Frio na Dureza e na Resistência à Corrosão de Aços Inoxidáveis Superduplex Envelhecidos a 475 oC |
J.M. Pardal S.S.M. Tavares J.V.S. Matias M.P.C. Fonseca E.A. Ponzio M.C.S.de Macêdo |
Rev. Virtual de Química Volume 7 Issues 5 Pages 1845 - 1865 |
| 04/2015 | Effect of abrasive particle size distribution on the wear rate and wear mode in micro-scale abrasive wear tests |
V.A.O. Gomez M.C.S. de Macêdo R.M. Souza C. Scandian |
Wear Volume 328 - 329 Pages 563 - 568 |
| 09/2014 | Effect of plasma nitriding potential on tribological behaviour of AISI D2 cold-worked tool steel |
M.D. Conci A.C.Bozzi A.R. Franco |
Wear Volume 317 Issues 1 - 2 Pages 130 - 136 |
| 02/2014 | Influence of heat treatments on microstructure and pitting corrosion resistance of 15%Cr supermartensitic stainless steel |
B.A.R.S. Barbosa S.S.M. Tavares I.N. Bastos M.R. Silva M.C.S. de Macêdo |
Corrosion Engineering, Science and Technology Volume 49 Issues 4 Pages 311 - 315 |
| 12/2013 | Failure of tube used in high pressure steam generator due to incrustation deposits |
S.S.M. Tavares C. Scandian M.C.S. de Macêdo F.J, da Silva J.M. Pardal |
Engineering Failure Analysis Volume 35 Pages 25 - 32 |
| 05/2013 | Effect of load partition and particle distribution on micro-abrasive wear mapping of two-phase metal matrix composites |
G.H.S. Gava R.M. Souza J.D.B. de Mello M.C.S. de Macêdo C. Scandian |
Wear Volume 301 Issues 1 - 2 Pages 130 - 136 |
| 12/2012 | Failure of ASTM A-106 Gr. B tubes by creep and erosive wear |
S.S.M. Tavares J.M. Pardal R.R. Pinheiro J.P. Gonçalves C. Scandian |
Engineering Failure Analysis Volume 26 Pages 337 - 343 |
| 08/2012 | Influence of microstructure on pitting corrosion resistance of alloy 904L superaustenitic stainless steel |
B.A.R.S. Barbosa S.S.M. Tavares A. Cobuci M.C.S. de Macêdo |
Corrosion Volume 68 Issue 8 Pages 739 - 746 |
| 07/2012 | Failure analysis of PSV spring in off shore gas production pipeline |
S.S.M. Tavares V. Anchieta E.R.C. Leão M.R. da Silva M.C.S. Macêdo |
Engineering Failure Analysis Volume 23 Pages 10 - 17 |
| 03/2013 | Correlation among abrasive wear tests |
L.A. Dutra J.D.B. de Mello M. C. S. de Macêdo C. Scandian |
Lubrification Science Volume 25 Issue 2 Pages 173 - 184 |
| 01/2012 | Effect of molybdenum and chromium contents on sliding wear of high-chromium white cast iron at high temperature |
K.F. Pinho C. Boher C. Scandian |
Lubrification Science Volume 25 Issue 2 Pages 153 - 162 |
| 12/2011 | Ultra-low carbon (ULC) steel modified by triode plasma nitriding and PVD coating:Effects on micro-abrasive wear behavior |
C.A.L. Leyva C. Godoy A.C. Bozzi J.C. Avelar-Batista Wilson |
Surface & Coatings Technology Volume 206 Issue 7 Pages 1796 - 1808 |
| 07/2011 | Influence of heat treatments on the micro-abrasion wear resistance of a superduplex stainless steel |
F.P. Marques W.M. da Silva J.M. Pardal S.S.M. Tavares C. Scandian |
Wear Volume 271 Issues 9 - 10 Pages 1288 - 1294 |
| 11/2010 | Microstructure and intergranular corrosion resistance of UNS S17400 (17-4PH) stainless steel |
S.S.M. Tavares F.J. da Silva C. Scandian G.F. da Silva H.F.G. de Abreu |
Corrosion Science Volume 52 Issue 11 Pages 3835 - 3839 |
| 09/2010 |
S.S.M. Tavares C. Scandian J.M. Pardal T.S. Luz F.J. da Silva |
Engineering Failure Analysis Volume 17 Issue 6 Pages 1500-1506 |
|
| 07/2009 | Failure induced by severe wear between studs and nuts of 17-4PH steel |
S.S.M. Tavares J.S.Corte J.M. Pardal C. Scandian L.F.G.Herculano |
Engineering Failure Analysis Volume 16 Issue 5 Pages 1765 - 1769 |
| 06/2009 | Effect of molybdenum and chromium contents in sliding wear of high-chromium white cast iron: The relationship between microstructure and wear |
C. Scandian C. Boher J.D.B. de Mello F. Rézaï-Ariab |
Wear Volume 267 Issue 1 - 4 Pages 401 - 408 |
| 07/2003 | Morphological features of the crystalline or quasicrystalline silicides observed in the quaternary Al-Fe-Mo-Si alloys |
M. C. S. de Macêdo G. Michot |
Journal of Materials Science Volume 38 Issue 14 Pages 3143-3153 |
